System settings page – NEC ExpressA1160 User Manual
Page 77
System remote console interface
3-35
you probably will not use this interface frequently). The system pages offer no
monitoring capability and are used only for specific infrequent tasks, such as partitioning
(refer to
3.6.2 Partitioning
) or accessing cell remote console interfaces (refer to
3.6.3
Cell Access
).
You can access the system remote console interface by clicking the system name in the
top banner of a partition or cell page rather than entering a MLAN address. Additional
authentication is required if access is from a partition Web page but is not required if
access is from a cell Web page. Refer to
2.1.2 Accessing and Logging On to remote
console interfaces
for more information.
The left side of the system page provides navigation to other pages. The name of the
displayed page is highlighted in the hierarchy. The following paragraphs describe each
system page.
3.6.1. System Settings Page
Figure 3-24
shows the system settings page.
Figure 3-24 System Settings Page
The navigation area contains the main navigation categories (refer to
3.4 Navigation
)
and links to each option in each category.
The summary area displays
•
System serial number
Identifies the system. This value is set at the factory. If it needs to be updated,
contact a service representative.
• System
style
Identifies the style number of the system. This value is set at the factory. If it needs