Nortel Networks NN43001-563 - Manual (Page 15)

Contents 15
Appendix D Subnet mask conversion from CIDR to dotted
decimal format 455
Appendix E CLI commands 457
Appendix F Configure a Netgear RM356 modem router for
remote access 459
Contents 459
Introduction 459
Security features of the RM356 modem router 460
Install the RM356 modem router 460
Configure the TM 3.1 PC to communicate with a remote system site through a
modem router 461
Configure the RM356 modem router through the manager menu 461
RM356 modem router manager menu (application notes on the ELAN subnet
installation) 465
Appendix G Upgrade an ITG Trunk 1.0 node to support ISDN
signaling trunks 471
Contents 471
Upgrade procedure summary 472
Before you begin 472
Install the DCHIP hardware upgrade kit 474
Install the DCHIP I/O Panel breakout cable from the upgrade kit 475
Upgrade the ITG 8-port trunk card ITG basic trunk software to ITG/ISL trunk
software 476
Step 1 - Remove ITG Trunk 1.0 configuration files 476
Step 2 - Transmit ITG Trunk 2.0 software to the ITG 8-port trunk cards 478
Remove ITG Trunk 1.0 configuration data from Meridian 1 480
Configure the Meridian 1 ITG/ISL trunk data 481
Upgrade considerations 481
Verify ROM-BIOS version 483
Upgrade Troubleshooting 483
TM 3.1 cannot refresh view (card not responding) 483
How to upgrade software using the ITG shell 483
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.