For ip trunk 3.01 (and later) – Nortel Networks NN43001-563 User Manual

Page 219

Advertising
background image

Configure IP Trunk 3.01 (and later) data

219

Prompt

Response

Description

SIDE

(USR)

Meridian 1 Option 11C Cabinet/CS 1000M Cabinet
SDI/DCH card acts as User side of ISL.

The DCHIP card acts as the Network side of ISL.

RLS

25

Release ID of PBX at the far end of the D-Channel. If the
far end has an incompatible release, it prevents sending
of application messages.

RCAP

ND2

Network Name Display type signalling. All nodes must
use same RCAP.

...

Configure the ISL D-channel on the Meridian 1/CS 1000M for the DCHIP
card for IP Trunk 3.01 (and later)

Because IP Peer Networking do not support QSIG, only the MCDN protocol
(SL1) is supported. Use LD 17 to configure the ISL D-channel for the DCHIP
card for Large and Small Systems.

LD 17 Configure the ISL D-channel for the DCHIP card (Large and Small Systems)

Prompt

Response

Description

REQ

NEW

Add new data.

TYPE

ADAN

Type of Data Block

ADAN

NEW DCH x

Action Device and Number

CTYP

DCHI

Card Type – Meridian 1 PBX 11C Cabinet/CS 1000M
Cabinet and Meridian 1 PBX 11C Chassis/CS 1000M
Chassis. Optional for Large Systems.

Card Type – recommended for all other systems

MSDL

GRP

x

Network Group number = 0 – 4. Applies to Meridian 1
PBX 81C CP PII/CS 1000M MG without Fiber Network
Fabric (FNF) only.

Network Group number = 0 – 7. Applies to Meridian 1
PBX 81C CP PII/CS 1000M MG with FNF only

DNUM

xx

Device Number for I/O ports= 0 – 15.
Applies to MSDL cards only.

CDNO

xx

Card Number where DCHI resides for Small System and
Media Gateway 1000B.

PORT

x

Port number = 0 – 3 for MSDL card
= 1 or 3 for DCHI on Meridian 1 PBX 11C Chassis/CS
1000M Cabinet

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising