Nortel Networks NN43001-563 User Manual
Page 365
365
OA and M using the ITG shell CLI and
overlays
Contents
This section contains information on the following topics:
"ITG Shell OA&M procedure summary" (page 366)
"Access the ITG shell through a maintenance port or Telnet" (page 366)
"Connect a PC to the card maintenance port" (page 367)
"Telnet to an IP trunk card through the OTM PC" (page 368)
"Change the default ITG shell password to maintain access security" (page
369)
"Reset the default ITG shell password" (page 370)
"Download the ITG operational measurements through the ITG shell" (page
372)
"Reset the operational measurements" (page 372)
"Display the number of DSPs" (page 373)
"Display IP Trunk 3.01 (and later) node Properties" (page 373)
"Display IP Trunk 3.01 (and later) Gatekeeper status" (page 374)
"Transfer files through the Command Line Interface" (page 375)
"Upgrade IP trunk card software using FTP" (page 377)
"Backup and restore from the CLI" (page 380)
"Recover the SNMP community names" (page 381)
"IP Trunk 3.01 (and later) configuration commands" (page 382)
"Download the IP Trunk 3.01 (and later) error log" (page 382)
"System commands – LD 32" (page 382)
"Disable the indicated IP trunk card" (page 361)
"Disable the indicated IP trunk card when idle" (page 362)
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563
01.01
Standard
Release 5.0
30 May 2007
Copyright © 2007, Nortel Networks
.