Replacing a compactflash pc card (c:/ drive) – Nortel Networks NN43001-563 User Manual

Page 56

Advertising
background image

56

System description

The Media Card 32-port trunk card package is shipped with the following
two major components, as well as other items:

Media Card 32-Port Assembly (NTVQ01BB)

CompactFlash card (NTM405AB)

ATTENTION

IMPORTANT!

The CompactFlash card must be installed on the Media Card before installing the
Media Card assembly in the IPE shelf.

Card upgrades

Media Card 32-port trunk cards running on previous ITG Trunk Releases
can be upgraded by replacing the CompactFlash with the NTM405 IP Trunk
3.01 (and later) application upgrade CompactFlash. ITG-Pentium 24-port
trunk cards and older Media Card 32-port trunk cards can both be upgraded
as outlined in

"Software upgrade" (page 59)

.

Replacing a CompactFlash PC Card (C:/ drive)

If it is necessary to remove the CompactFlash PC (CFlash) card, follow the
steps in

Procedure 1 "Removing the CFlash card on NTVQ01BB" (page 57)

.

Then, follow the steps in

Procedure 2 "Installing the CFlash card" (page

57)

to install the new CFlash card.

WARNING

The Media Card 32-port trunk card does not require file transfers
to or from the A:/ drive for normal operation. If a CFlash ATA card
is to be used for file transfers to or from the A:/ drive, to C:/ drive,
Nortel recommends that the CFlash ATA card be formatted on the
Media Card 32-port trunk card before use.

CAUTION

Service Interruption

When replacing the CFlash, contact the Nortel Technical Support
Center.

CAUTION

CAUTION WITH ESDS DEVICES

Use ESDS precautions when handling the Media Card 32-port
trunk card.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising