Nortel Networks NN43001-563 - Manual (Page 311)

Add an IP Trunk 3.01 (and later) node 311
ITG – ISDN IP Trunk window. See Figure 101 "ITG – ISDN IP Trunk
window with new node displayed" (page 311) .
Figure 101
ITG, ISDN IP Trunk window with new node displayed
—End—
Edit a node
Follow the steps in Procedure 46 "Editing a node" (page 311) to edit a
node’s information.
Procedure 46
Editing a node
Step Action
1 In the TM 3.1 Navigator window, under Services, right-click ITG
ISDN IP Trunks. A drop-down list appears.
2 Click Open. See Figure 91 "OTM Navigator – ITG ISDN IP Trunks
service" (page 301) .
The IP Telephony Gateway – ISDN IP Trunk window opens, as
seen in
Figure 92 "ITG – ISDN IP Trunk window" (page 302) . The
smaller upper window lists the systems. The larger lower window
lists all the cards in the selected system’s node.
3 In the window, select the node to be edited from the list. From the
upper menu, click Configuration > Properties. See
Figure 102
"Change node properties" (page 312) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.