Nortel Networks NN43001-563 - Manual (Page 351)

Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrieving an existing node 351
Add an IP Trunk 3.01 (and later) node on TM 3.1 by retrieving an
existing node
After an IP Trunk 3.01 (and later) node is manually configured and installed,
that node can be added to another TM 3.1 PC by retrieving the configuration
data from the existing IP Trunk 3.01 (and later) node.
Use this optional procedure to perform the following actions:
• To combine existing IP Trunk 3.01 (and later) nodes on the network
that were originally configured from different TM 3.1 PCs onto one TM
3.1 210 PC to manage the IP Trunk 3.01 (and later) network from a
single point of view.
• To restore the IP Trunk 3.01 (and later) configuration database to an TM
3.1 PC whose hard drive had failed. (The TM 3.1 IP Trunk 3.01 (and
later) nodes can also be restored from the Full TM 3.1 Backup.)
• To temporarily create a copy of the IP Trunk 3.01 (and later) node
configuration on another PC for maintenance and diagnostic purposes.
For example, a copy of an IP Trunk 3.01 (and later) node database can
be created on an TM 3.1 PC located at a remote technical support
center.
The site name, Meridian 1 system name, and Meridian 1 customer number
must exist in the TM 3.1 Navigator before a new IP Trunk 3.01 (and later)
node can be added. Multiple IP Trunk 3.01 (and later) nodes can be added
in the TM 3.1 ITG ISDN IP Trunks application for each Meridian 1 customer.
If multiple TM 3.1 PCs are used to manage the same IP Trunk 3.01 (and
later) network and the PCs are not using file-sharing, caution must be taken
to synchronize the different copies of the IP Trunk 3.01 (and later) database.
Use the TM 3.1 ITG menu Configuration > Synchronize > Retrieve
function to synchronize the TM 3.1 IP Trunk 3.01 (and later) database with
the IP Trunk 3.01 (and later) node’s database.
Retrieve and add an IP Trunk 3.01 (and later) node for administration
purposes
Follow the steps in Procedure 56 "Retrieving and adding an IP Trunk 3.01
(and later) node for administration purposes" (page 351) to retrieve and add
an IP Trunk 3.01 (and later) node for administration purposes.
Procedure 56
Retrieving and adding an IP Trunk 3.01 (and later) node for administration
purposes
Step Action
1 Double-click the ITG ISDN IP Trunks icon from the Services folder.
The IP Telephony Gateway - ISDN IP Trunk window opens.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.