Nortel Networks NN43001-563 - Manual (Page 271)

Check and download IP trunk card software in TM 3.1 271
Figure 62
esn5PrefixShow
4 At the ITG prompt, enter >esn5PrefixSet "1xx" where xx = the NCOS
value. In
Figure 63 "esn5PrefixSet" (page 271) , the default value
was changed from NCOS 00 to 03.
Figure 63
esn5PrefixSet
—End—
Check and download IP trunk card software in TM 3.1
Follow the steps in Procedure 35 "Checking the IP trunk cards software
version" (page 271) to check the software version of the IP trunk cards in
a new IP Trunk 3. 0 node. All cards must have same version. To ensure
proper IP Trunk 3.01 (and later) network operation, Nortel recommends that
all network nodes have the same software version. Verify that the software
release on each card is the latest recommended software release for IP
Trunk 3.01 (and later) by connecting to a Nortel website that contains the
latest software versions for the Media Card 32-port and the ITG-Pentium
24-port trunk card.
Procedure 35
Checking the IP trunk cards software version
Step Action
1 From the IP Telephony Gateway - ISDN IP Trunk window, click
the new node.
2 For each card in the node, starting with Leader 0, double-click the
card entry in the lower half of the window. The Card Properties
window appears.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.