Nortel Networks NN43001-563 - Manual (Page 210)

210 Install and configure IP Trunk 3.01 (and later) node
Figure 44
ITG card ELAN/TLAN adapter fitted to a Meridian 1 PBX 11C Chassis/CS 1000M Chassis
When Media Card 32-port trunk cards are used to replace ITG-Pentium
24-port trunk cards, the existing NTMF94EA or NTCW84KA cabling can
be used.
The DCHIP connection on the NTCW84KA cable does not function with
the Media Card 32-port trunk card. To connect the DCHIP where the
NTCW84KA cable is being used, follow the instructions in
Procedure 15
"Assembling the DCHIP cable" (page 211) .
RS-232 maintenance port
The RS-232 maintenance port provides access to the Media Card 32-port
trunk card command prompt for monitoring and maintenance purposes,
such as upgrades and debugging. This port is available at the 9-pin
connector on the ITG Card ELAN/TLAN Adapter (L-adapter) subnet and at
the mini-DIN socket on the faceplate.
The serial port settings are as follows:
• 9600 baud
• 8 data bits
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.