Nortel Networks NN43001-563 - Manual (Page 335)

Define the dialing plan information 335
Figure 131
ITG Node Gatekeeper Properties window
• Alternatively, from the ITG Dialing PLan window, click
Configuration > Gatekeeper.
No matter which method was used, the ITG Node Gatekeeper
Properties window opens.
2 Select the correct Gatekeeper option from the Gatekeeper Option
drop-down list. The options are as follows:
• Use Gatekeeper Zone from TM 3.1 Navigator (see Procedure 50
"Using a Gatekeeper zone from OTM Navigator" (page 336) ).
• Use Independent Gatekeeper (see Procedure 51 "Using the
Independent Gatekeeper option" (page 337) ).
• No Gatekeeper. Select this option to remove the provisioning
that tells the IP trunk card to use a Gatekeeper.
—End—
Use Gatekeeper Zone from TM 3.1 Navigator option
If "Use Gatekeeper zone from TM 3.1 Navigator" was selected from the
Gatekeeper Option drop-down list, follow the steps in
Procedure 50 "Using
a Gatekeeper zone from OTM Navigator" (page 336) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.