Nortel Networks NN43001-563 - Manual (Page 403)

ITG shell command set 403
Command Description
Example: ITG> prevOmFilePut "ngals042", "anonymous", "guest",
"/prevDir", "omFile"
traceFilePut hostname,
username, password, directory
path, filename
The traceFilePut task on the host starts an FTP session with
the given parameters and downloads the IP trunk card’s call
trace file to the indicated location on the host.
Example: ITG> traceFilePut "ngals042", "anonymous", "guest", "/trcDir",
"trcFile"
currLogFilePut hostname,
username, password, directory
path, filename
The logFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card’s current log
file to the indicated location on the host.
Example: ITG> currLogFilePut "ngals042", "anonymous", "guest",
"/currDir", "logFile"
prevLogFilePut hostname,
username, password, directory
path, filename
The logFilePut task on the host starts an FTP session with the
given parameters and downloads the IP trunk card’s previous
log file to the indicated location on the host.
Example: ITG> prevLogFilePut "ngals042", "anonymous", "guest",
"/currDir", "logFile"
bootPFilePut hostname,
username, password, directory
path, filename
The bootpFilePut task on the host starts an FTP session
with the given parameters and downloads the IP trunk card’s
BOOTP file to the indicated location on the host.
Example: ITG> bootpFilePut "ngals042", "anonymous", "guest",
"/bootpDir", "bootpFile"
hostFilePut hostname,
username, password, directory
path, filename, ITGFileName
Transfer any file on the IP trunk card from location ITGFileName
and does a put using FTP to the host indicated by hostname,
username, password, and directory path.
ITGFileName is the full path (that is, path/filename of where the
file is taken from on the IP trunk card).
Example: ITG> hostFilePut "ngals042", "anonymous", "guest", "/hostDir",
"hostFile", "/C:/CONFIG/CONFIG1.INI"
Table 63
NVRAM IP configuration commands
Command Description
NVRIPSet IP address Set the IP address in NVRAM.
Example: ITG> NVRRIPSet "47.23.34.19"
NVRGWSet IP gateway Set the default gateway address in NVRAM.
Example: ITG> NVRRGWSet "47.0.0.1"
NVRSMSet subnet mask Set the subnet mask in NVRAM.
Example: ITG> NVRRSMSet "255.255.240.0"
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.