Nortel Networks NN43001-563 - Manual (Page 352)

352 TM 3.1 OA and M using TM 3.1 applications
2 In the IP Telephony Gateway - ISDN IP Trunk window, select the
drop-down list Configuration > Node > Add. The ADD ITG Node
dialog box appears.
3 Click the second option Retrieve the active configuration from an
existing node. Leave "Meridian 1" as the default "System type".
Click OK. The Retrieve ITG Node window appears. See
Figure 142
"Retrieve ITG node window" (page 352) .
Figure 142
Retrieve ITG node window
4 In the Retrieve ITG node window, select the TM 3.1 Site, TM 3.1
System, and Customer number from the drop-down lists.
The site name, system name, and customer number must exist in
the TM 3.1 Navigator before a new IP Trunk 3.01 (and later) node
can be added.
5 Enter the ELAN network interface IP address field for Leader 0 or
Leader 1 on the existing node.
6 Enter the SNMP read/write community name string. The default
is "otm321".
To retrieve an ITG card, the SNMP read community name string
cannot be used.
7 Click the Start Retrieve button.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.