Roland VP-770 - Manual (Page 103)

103
Backing Up to USB Memory
( UTILITY–PROJECT)
Here’s how you can back up the VP-770’s registrations and system settings, or restore the backed-up data
back into the VP-770.
Backing Up to USB Memory
( USER BACKUP)
You can back up the following data to USB memory.
Registrations you’ve saved
System settings
The following data cannot be backed up.
The factory-set registrations
A registration that is currently being edited and has not yet been saved
The phrase held in the Sound Looper
Audio Key settings and the audio fi les used by Audio Key
If USB memory contains other backup data, executing the backup operation will overwrite the
previously stored backup data. If your USB memory already contains important backup data, you
must use a diff erent USB memory device.
Backup Procedure
Connect your USB memory (sold separately) to the USB MEMORY
connector (p. 22).
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Utility,” then press
the [F2] (ENTER) button.
The UTILITY screen will appear.
•
•
•
•
•
•
*
1.
2.
3.