Roland VP-770 - Manual (Page 109)

109
Screensaver Settings
( UTILITY– SCREENSAVER )
operated for a certain period of time.
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Utility,” then press
the [F2] (ENTER) button.
The UTILITY screen will appear.
Use the cursor buttons or the value dial to select “Screensaver,” then
press the [F2] (ENTER) button.
The SCREENSAVER screen will appear.
Use the cursor buttons and the value dial to change the value.
Parameter Value Description
Type 1–5 Select the type of screensaver.
Time OFF, 5 min–60 min Set the time (minutes) until the screensaver begins working.
If this is OFF, the screensaver will not appear.
You can press the [F1] (CHECK) button to get a look at the screensaver image at the size of the
actual screen.
If you want to save the edited setting in system memory, press the
[F2] (SYS WRITE) button.
1.
2.
3.
4.
✍
5.