Roland VP-770 - Manual (Page 106)

106
Format USB Memory
This formats (initializes) the USB memory that’s connected to the USB MEMORY connector.
If the format of the USB memory is other than FAT, it won’t be recognized by the VP-770. (Nor will the
VP-770 be able to format it.) In this case, use your computer to format the USB memory using the
“FAT” or “FAT32” fi le system. (If you’re using Mac OS X, format the USB memory using the “MS-DOS fi le
system (FAT32).”)
Connect your USB memory (sold separately) to the USB MEMORY
connector (p. 22).
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Utility,” then press
the [F2] (ENTER) button.
The UTILITY screen will appear.
Use the cursor buttons or the value dial to select “Project (USB),” then
press the [F2] (ENTER) button.
The PROJECT screen will appear.
Use the cursor buttons or the value dial to select “Format USB
Memory,” then press the [F2] (EXECUTE) button.
The confi rmation message will appear, then press the [F1] (OK)
button to start format.
When the display indicates “Completed!” the format has been completed.
If you decide not to execute the format, press the [EXIT] button to return to the previous screen.
*
1.
2.
3.
4.
5.
6.