Roland VP-770 - Manual (Page 82)

82
Editing a Registration
Here’s the basic procedure for editing a registration.
Press a [REGISTRATION] button to select the registration that you
want to edit (p. 78).
Use the cursor buttons to move the cursor, and then press the [F1]
(EDIT) button.
Cursor location Operation of the EDIT button Page
Registration number
Makes settings for the entire
registration.
p. 83
VOCAL DESIGNER fi eld
Makes settings for the Vocal
Designer part.
p. 86
ENSEMBLE fi eld
Makes settings for the
Ensemble part.
p. 88
If you want to make settings for the Bass & Percussion part, hold down the [SHIFT] button and
press the [BASS] or [PERC] button to access the BASS & PERC EDIT screen (p. 92).
Use the cursor buttons to move the cursor to the parameter that you
want to edit.
If not all parameters can be shown in a single screen, a scroll bar is shown at the right edge of the screen. In
this case, use the cursor [ ] button to scroll the screen downward.
You can access a list of value by holding down the [SHIFT] button and pressing the [F1] (LIST)
button in an EDIT screen. From the REGISTRATION EDIT screen, press the [F1] (CONTROL) button to
access the REGIST CONTROL (Registration Control settings) screen.
Use the value dial to change the value.
You can change the value in steps of one by pressing the cursor buttons [ ] or [ ]. If you want
to quickly increase the value, hold down [ ] and press [ ]. Conversely, you can quickly decrease
the value by holding down [ ] and pressing [ ]. You can change the value in larger steps by
holding down [SHIFT] and pressing [ ] or [ ].
Repeat steps 3 and 4 to edit the parameters as desired.
If you want to save the changes you made, refer to “Saving a Regis-
tration” (p. 81).
1.
2.
✍
3.
✍
4.
✍
5.
6.