Roland VP-770 - Manual (Page 105)

105
Restoring the Backup Data
( USER RESTORE)
restore operation, the registrations and system settings inside the VP-770 will be overwritten.
Connect your USB memory (sold separately) to the USB MEMORY
connector (p. 22).
Press the [MENU] button to access the MENU screen.
Use the cursor buttons or the value dial to select “Utility,” then press
the [F2] (ENTER) button.
The UTILITY screen will appear.
Use the cursor buttons or the value dial to select “Project (USB),” then
press the [F2] (ENTER) button.
The PROJECT screen will appear.
Use the cursor buttons or the value dial to select “User Restore,” then
press the [F2] (EXECUTE) button.
The confi rmation message will appear, then press the [F1] (OK)
button to start restore.
When the display indicates “Completed!” the restore has been completed.
If you decide not to execute the restore, press the [EXIT] button to return to the previous screen.
1.
2.
3.
4.
5.
6.