Roland VP-770 - Manual (Page 76)

76
Erasing the Phrase
Hold down the [STOP] button and press the [REC/PLAY] button.
The confi rmation message will appear.
Press the [F1] (OK) button to erase the phrase.
If you decide not to erase the phrase, press the [F2] (CANCEL) button.
You can’t recover a phrase that has been erased.
Saving the Phrase to USB Memory
If you save the recorded phrase to USB memory (sold separately), you’ll be able to use it with the Audio Key
function (p. 68).
Make sure that the phrase is not playing.
Press the [SAVE TO USB MEMORY] button.
The WRITE FILE NAME screen will appear.
Use the cursor buttons and the value dial to enter a name, and then
press the [F2] (WRITE) button.
For details on assigning names, refer to p. 81.
The confi rmation message will appear.
Press the [F1] (OK) button to save the phrase to USB memory.
When the save is completed, the previous display will reappear.
It is not possible to load a phrase from USB memory into the Sound Looper.
Adjusting the Volume of the Phrase
Hold down the [SHIFT] button and press the [REC/PLAY] button.
The LOOPER SETUP screen will appear.
Press the cursor buttons to move the cursor to “Level.”
Use the value dial to change the value of “Level.”
Press the [EXIT] button to return to the top screen.
1.
2.
*
1.
2.
3.
4.
*
1.
2.
3.