Saving the system settings – Roland VP-770 User Manual
Page 96
96
Saving the System Settings
( SYSTEM WRITE)
Changes you make to the System function settings are only temporary-they will be discarded as soon as
the power is turned off . If you want to keep any changes you’ve made in the system settings, you must save
them in internal system memory.
When you perform the save procedure, the data that previously occupied the save destination will be
lost. However, the factory setting data can be recovered by performing the Factory Reset procedure.
Change the system function settings, and press the [F2] (SYS WRITE)
button.
The confi rmation message will appear.
Press the [F1] (OK) button in the confi rmation screen to save your
settings.
Once the settings have been saved, “Completed!” will appear in the screen.
If you decide not to save the settings, press the [EXIT] button to return to the previous screen.
*
1.
2.