Roland VP-770 - Manual (Page 22)

22
Connecting USB Memory (Sold Separately)
Audio fi les saved on USB memory (sold separately) can be assigned to the keyboard for playback (p. 68),
and you can back up all of the VP-770’s settings to USB memory as a “project” (p. 103).
Open the USB MEMORY connector cover and insert the USB memory.
Be sure to keep the USB MEMORY connector cover closed when not connecting or disconnecting USB
memory.
Carefully insert the USB memory all the way in—until it is fi rmly in place.
Connect the USB memory after you turn on the VP-770’s power. Never disconnect the USB memory
while the VP-770 is powered up.
Using the Included USB Memory Protector
You can use the included USB memory protector to prevent theft of the USB memory connected to the
VP-770.
You must use the included screw.
You must use the included Allen wrench to tighten or remove the screw. Using a tool that does not
match the screw head will damage it.
Be careful not to over-tighten the screw. Doing so may damage the screw’s head, causing the wrench
to rotate uselessly.
To tighten the screw, turn the Allen wrench clockwise. To loosen the screw, turn the Allen wrench
counter-clockwise.
tighten loosen
Keep the included screw out of the reach of small children to ensure it is not swallowed accidentally.
*
*
*
*
*
*
*
*