Roland VP-770 - Manual (Page 99)

99
Parameter Value Description
Metro Sound Selects the sound of the metronome.
TYPE 1 Electronic metronome
TYPE 2 Mechanical metronome
TYPE 3 Pulse tone
TYPE 4 Beep tone
TYPE 5 Cowbell sound
TYPE 6 Stick sound
SYSTEM CONTROL
Here you can make settings for the controllers that are made at the system level.
SYSTEM KEYBOARD
Here you can make settings for the keyboard and aftertouch.
Parameter Value Description
Kbd Velo REAL, 1–127 Specifi es the velocity value that will be transmitted when you play the
keyboard. If you want actual keyboard velocity to be transmitted, set this to
“REAL.” If you want a fi xed velocity value to be transmitted regardless of how
you play, specify the desired value (1–127).
Kbd Velo Curve Adjusts the keyboard’s touch.
LIGHT Light weight synthesizer keyboard like
MEDIUM Standard
HEAVY Acoustic piano simulation
Kbd Velo Sens -63– +63 Adjusts the sensitivity of the keyboard. As you increase this setting, higher
velocity values will be transmitted according to the force with which you
play. Normally you will leave this set at “0.”
Aft Source REGIST, SYSTEM The assignments for the aftertouch can be stored individually in each
registration. When you select a diff erent registration, this setting specifi es
whether the aftertouch will be given the assignments stored in the
registration (REGIST), or the assignments stored in the system settings for
the entire VP-770 (SYSTEM).
Aft Sens 0–100 Specifi es the Aftertouch sensitivity. Higher values will allow Aftertouch to
be applied more easily. Normally you will leave this at “100.”
Aft Assign Specifi es the aftertouch eff ect.
OFF Off
MOD Applies modulation.
DYN1 Changes the volume. Transmits MIDI message CC#2 (breath control) to the
sound generator section. This is the same operation as Voice Expression
(p. 66), and will operate only in the positive (+) direction to increase the
volume.
DYN2 Changes the volume. Transmits MIDI message CC#4 (foot control) to the
sound generator section. For STRINGS and BRASS sounds, this allows the
volume to be controlled in the ± directions (it will not go to zero). For other
sounds, the volume can be controlled only in the “+” direction.
FILTER Changes the tone.
WAH Applies a wah eff ect to sounds that support Wah.
BEND-DOWN Lowers the pitch.
BEND-UP Raises the pitch.
Aft Part Specifi es the part(s) that will be controlled by aftertouch.
VOC/ENS Vocal Designer part and Ensemble Part.
VOC Vocal Designer part only.
ENS Ensemble part only.
OFF Off