Roland VP-770 - Manual (Page 81)

81
Saving a Registration
( REGISTRATION WRITE)
registration (When you edit the registration settings, the “*” symbol will appear in the upper right of the top
screen). If you want to keep the modifi ed registration, you must save it.
When you execute the save operation, the registration that had previously been saved to the save
destination will be overwritten and lost. However, the internal factory-set registrations can be
recovered by executing the Factory Reset operation.
Press the [F2] (WRITE) button.
The REGIST NAME screen will appear.
Use the cursor buttons and the value dial to enter a name, and then
press the [F2] (WRITE) button.
Value dial Chooses characters.
Cursor left/right Moves the cursor.
Cursor up/down Switches between uppercase/lowercase.
[SHIFT]+[F1] (DELETE) Deletes the character at the cursor, and
moves the subsequent characters one
place forward.
[SHIFT]+[F2] (INSERT) Inserts a space at the cursor location.
A screen will appear, allowing you to select the write-
destination registration.
Use the cursor buttons or the value dial to select the write-destina-
tion registration, and then press the [F2] (EXEC) button.
The confi rmation message will appear.
At the confi rmation screen, press the [F1] (OK) button to save the
registration.
When the “Completed!” indication appears, the registration has been saved.
If you decide not to save, press the [EXIT] button to return to the previous screen.
*
1.
2.
3.
4.
You can also save the registration
by pressing the [F2] (WRITE) button
in one of the Vocal Designer,
Ensemble, or Bass & Percussion
editing screens.
✍
As the destination of a write, you’ll normally only
be able to select a user registration (U11–U44).
However, if you’ve disabled Preset Protect (p. 78), all
registrations will be available as write destinations.
You can also select the write destination by using
the buttons as described on p. 79.
*
*