Roland VP-770 - Manual (Page 71)

71
Press the [F1] (EDIT) button.
The following screen will appear.
Now you can change the audio fi le that is assigned to each key, and specify how it is to be played (the
playback mode).
Press the key whose settings you want to change.
The audio fi le assigned to each key and its playback mode are shown.
Use the VALUE dial to select the audio fi le that will be played by the
specifi ed key.
If you select the “No Assign,” the audio fi le assigned to that key will be cleared. No playback mode indica-
tion is shown on the graphic for keys to which no audio fi le is assigned, and the audio fi le name fi eld will
indicate “No Assign.”
Press the [F1] (MODE) button to select play mode.
The playback mode (p. 69) will change each time you press the [F1] (MODE) button.
Repeat steps 3–5 to edit the settings.
Press the [F2] (WRITE) button.
The confi rmation message will appear.
If you don’t want to store the settings, press the [F2] (CANCEL) button.
The operation will be cancelled, and you’ll return to the previous screen.
Press the [F1] (OK) button to overwrite the settings of the audio fi le
set.
When the settings have been written, the indicators will go out, and you will return to the previous screen.
2.
3.
4.
5.
6.
7.
8.
If the USB memory does not contain an audio
fi le set, the [WRITE] button is not shown in the
display.
✍