Roland VP-770 User Manual
Page 104
Advertising
104
Use the cursor buttons or the value dial to select “Project (USB),” then
press the [F2] (ENTER) button.
The PROJECT screen will appear.
Use the cursor buttons or the value dial to select “User Backup,” then
press the [F2] (EXECUTE) button.
The confi rmation message will appear, then press the [F1] (OK)
button to start backup.
When the display indicates “Completed!” the backup has been completed.
If you decide not to execute the backup, press the [EXIT] button to return to the previous screen.
4.
5.
6.
Advertising