Omega WI8XX-U - Manual (Page 20)

2.1.5.3 Jumper Settings for Display Color Setup
To change the color of the lower display follow the instructions below:
1. The unit should be removed from the panel and opened.
Refer to Section 2.1.4.3 for assembly and disassembly instructions.
2. Locate S1 jumper, on the back side of the display board. Select the
position for your color choice of Red, Green or Amber.
Figure 2.10 Location of S1 Jumper
To change the color of the upper Display, see Section 4.3.7.5.
1
4 3 2
ON
1
ON
RED
GREEN
S1
8
GREEN
RED
S1
AMBER S1 (Open)
S1
Display Board
14