Omega WI8XX-U - Manual (Page 21)

2.1.5.4 Dip Switches
To change the DIP switches, follow the instructions below:
1. The unit should be removed from the panel and opened.
Refer to Section 2.1.4.3 for assembly and disassembly instructions.
2. Locate the 4 and 8 position DIP switches, on the top board.
The Meter is shipped with all DIP switches in "OFF" position
To set the Wireless and Ethernet settings to Factory Default, Refer to
Section 7.
Figure 2.11 Location of DIP Switches
1
4 3 2 OFF
ON
1
4
3
2
OFF
ON
1
ON
OFF
S1
8
4 Position
DIP Switch on
Ethernet Board
8 Position
DIP Switch on
Wireless Board
OFF
ON
1
8
15
1 N/A
2 To change the Ethernet settings to
Factory Default
3 To enable/disable DHCP
4 N/A
1 To change the
Wireless settings to
Factory Default
2-8 N/A