Omega WI8XX-U - Manual (Page 49)

4.3.7.4 Analog Output Retransmission
This menu will appear only if you have the Analog Output Option installed
in your Meter.
Figure 4.18 Analog Output Retransmission
Retransmission: When enabled, the input data will be scaled based on Input
Low and Input High and will be outputted. If the input reaches high value the
output will be 10V or 20mA. If the input reaches low value, the output will be
0V or 0mA.
Voltage/Current: Select the output to be Voltage (0-10V) or Current (0-20mA).
Input Low: The minimum input value scaled for Output Low.
Output Low: Output Voltage or Current represented by Input Low.
Input High: The minimum input value scaled for Output High.
Output High: Output Voltage or Current represented by Input High.
Input High
Output Low
Retransmission
Voltage/Current
Enabled
Voltage
0.00
Input Low
0
Output High
10.00
Min. 0V
Max. 10V
1000
Main Menu
SETUP
Analog Output Retransmission
SETUP
http://192.168.1.200 Address
Cancel
Update
43