Onkyo CDR-201A - Manual (Page 22)

22
CD
DUBBING
CD
DUBBING
CD dubbing (component system operation)
CD dubbing begins.
The CD player returns to the beginning of the
song and searches for the peak level. The CDR-
201A set the optimum recording level to match
that peak level. Then recording begins. When
the track is completed, the CDR-201A stops and
the CD player continues on to the next track.
Note:
The dubbing mode is the mode that is currently set.
However, when performing single-track CD dubbing
with CD-RW, even if the album mode is set, tracks
that cannot be fully recorded will not be erased, but
will be recorded until the disc becomes full.
Single-track CD dubbing
Perform single-track CD dubbing when connected to
component system to record the track currently
being played (or paused) with the CD player with
one touch.
1
Play the CD with the CD player.
2
Press the CD DUBBING button while
the track you want to record is playing.
To cancel auto finalization during recording
Press the FINALIZE button repeatedly until "Auto
Off" appears. (The FINALIZE indicator disappears.)
When the CD finishes
The CDR-201A automatically stops. (To perform
finalization after completion, press the FINALIZE
button.) If you turn on auto finalization, then the
CDR-201A will stop after auto finalization.
To confirm settings during recording
Press the CD DUBBING button.
To stop the recording
Press the e button.
* DLA
Digital Rec Level Adjustment
During CD dubbing, the level sync function turns on.
The CD player begins a search for the peak level
and the CDR-201A set the optimum recording
level to match that peak level (DLA* Link 2
function).
Then the music CD is digitally recorded from the
first track to the last track.
Auto finalization
To use auto finalization, press the FINALIZE button
repeatedly during recording until "Auto On"
appears. (The FINALIZE indicator appears flashing.)
Finalization starts automatically as soon as the CD
dubbing finishes.
Note:
The auto finalization automatically starts after CD
dubbing completes unless the recording is
interrupted as follows:
• If you press the e button to stop the CDR-
201A.
• If you power off the system tuner amplifier (R-
801A) which the CDR-201A is connected to, or
the sleep time shuts down the whole system.
5
Press the CD DUBBING button.
CD dubbing begins.