Onkyo CDR-201A - Manual (Page 37)

37
Operations
Entering names
Entering track names
1
Turn the MULTI JOG dial to select the
desired track.
During playback, pause, or recording, the track
selected currently will be named.
PUSH TO ENTER
MULTI JOG
4
Press the YES button to end name
input.
Or, press the NAME button on the remote
controller (RC-448C).
YES
CDR-201A RC-448C
NAME
AUDIO CD RECORDER
DISPLAY
STANDBY / ON
STANDBY
INPUT CD DUBBING REC FINALIZE EDIT / NO YES
PUSH TO ENTER
MULTI JOG
CDR-201A
STANDBY/ ON OPEN / CLOSE
RANDOM MEMORY REPEAT
NAME ABC DEF
2 3 1
SCROLL GHI MNO J K L
4 5 6
CLEAR
DISPLAY ENTER
PQRS TUV W XYZ
10/0 >10
7 8 9
REC
RC-448C
NAME
EDIT/NO
YES
q MULTI JOG w
To write the entered names to the disc
Finalize the disc.
The names you enter are temporarily stored in the
CDR-201A and then written to the disc during
finalization. Be aware of the following notes when
finalizing a disc.
Note:
If you enter a disc name and remove the disc
without finalizing it, the name will not be stored.
You will need to enter the name again.
2
Press the EDIT/NO button and turn the
MULTI JOG dial until " Name In?"
appears.
Or, press the remote controller NAME button.
Pressing the NAME button proceeds to the state
after step 2 is complete (go to step 3).
EDIT / NO
PUSH TO ENTER
MULTI JOG
CDR-201A RC-448C
NAME