Onkyo CDR-201A - Manual (Page 23)

23
Operations
Synchronous recording
(component system operation)
AUDIO CD RECORDER
DISPLAY
STANDBY / ON
STANDBY
INPUT CD DUBBING REC FINALIZE EDIT / NO YES
PUSH TO ENTER
MULTI JOG
CDR-201A
STANDBY/ ON OPEN / CLOSE
RANDOM MEMORY REPEAT
NAME ABC DEF
2 3 1
SCROLL GHI MNO J K L
4 5 6
CLEAR
DISPLAY ENTER
PQRS TUV W XYZ
10/0 >10
7 8 9
REC
RC-448C
INPUT
o REC
o REC
For analog recording, select "Analog In."
Proceed to step 3 if you do not wish to adjust
the recording level.
Note:
Synchronous recording cannot be performed
when "Digital In 2" is selected.
2
Press the s button on the CD player
to start playback.
3
Press the o REC button (or the remote
controller REC o button).
"Rec Setup" appears in the display followed by
the time display (the recording standby state).
1
Repeatedly press the INPUT button
until "Digital In1" appears.
When connected to a component system, the
synchronous recording operations given below are
possible.
• Synchronous recording from the CD player to
the CDR-201A.
• Synchronous recording from the MD recorder or
tape deck to the CDR-201A.
• Synchronous recording from the CDR-201A to a
MD recorder or tape deck.
Synchronous recording from a CD
player to the CDR-201A
Preparation
• Turn on the CDR-201A (see page 20).
• Place the music CD in the CD player. (Refer to
the instruction manual for the C-701A.)
• Place a recordable CD-R or CD-RW in the CDR-
201A (see page 20).
Proceed to step 6 if you do not wish to adjust
the recording level.
INPUT
REC REC
CDR-201A RC-448C