Onkyo CDR-201A - Manual (Page 36)

36
Entering names
AUDIO CD RECORDER
DISPLAY
STANDBY / ON
STANDBY
INPUT CD DUBBING REC FINALIZE EDIT / NO YES
PUSH TO ENTER
MULTI JOG
CDR-201A
STANDBY/ ON OPEN / CLOSE
RANDOM MEMORY REPEAT
NAME ABC DEF
2 3 1
SCROLL GHI MNO J K L
4 5 6
CLEAR
DISPLAY ENTER
PQRS TUV W XYZ
10/0 >10
7 8 9
REC
NAME
q/
w
d/
f
d/f
RC-448C
EDIT/NO q MULTI JOG w
Numeric
buttons
(2) Turn the MULTI JOG dial to select the
desired character and press the MULTI
JOG dial to enter it.
To change the type of input characters
Press the DISPLAY button and select the type of
input characters in the above step 3-(1) before
turning and pressing the MULTI JOG dial to enter
characters.
Using the remote controller (RC-448C) for
entering names
• Entering an alphabetic character
Press the desired numeric button to sequentially
display the characters indicated on it. For
example, pressing the 2/ABC button each time
changes the displayed character in the sequence
of A
→B→C→A. When the character you want
appears, press the ENTER button.
• Entering an easy name
Press the desired numeric button to sequentially
display the easy names by the initial letters
indicated on it. For example, pressing the 2/ABC
button each time changes the displayed easy
name to BALLAD, BLUES, CLASSIC, and so on.
When the easy name you want appears, press
the ENTER button.
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
• Entering a number or symbol
Press the desired numeric button to display the
number indicated on it. Or, repeatedly press the
>10/./* button to change displaying the desired
symbol, ./*-,!?( ), in that order, and press the 10/
0/- button to display a space. When the number
or symbol you want appears, press the ENTER
button.
You may select the desired character using the
q
or w button and press the ENTER
button to enter it.
Note:
Using the remote controller to enter symbols
You may not be able to enter some symbols using
the remote controller numeric buttons. To enter a
symbol, select it using the remote controller q
or w button.
To correct an input character
Press the d or f button on the CDR-201A or
the remote controller. While the character you wish
to correct appears flashing, enter a correct character.
To insert a character
Press the d or f button on the CDR-201A or
the remote controller. When the position where you
wish to insert a character appears flashing, turn the
MULTI JOG dial counterclockwise (
appears
flashing) and press the MULTI JOG dial. Enter a
correct character at the position where the cursor is
flashing.
To erase a character
Press the d or f button on the CDR-201A or
the remote controller. When the character you wish
to erase appears flashing, press the EDIT/NO button
or the remote controller CLEAR button.