Onkyo CDR-201A - Manual (Page 28)

28
Digital recording
4
Adjust the recording level.
Refer to page 24, step 4 "Adjust the recording
level."
5
Stop the playback of the recording
source.
6
Press the n button (or the remote
controller s button) and start the
recording source.
Recording starts. The track numbers are
automatically recorded as well.
To pause the recording
Press the n button (or the remote controller g
button). To resume recording, press the n button
(or the remote controller s button) when the time
display appears.
To stop the recording
Press the e button.
Notes:
• When digitally recording satellite broadcasts, the
track numbers may not be assigned properly. If
this occurs, turn off the level sync function and
set the track numbers manually (see page 31).
• If the time between tracks is extremely short, the
track numbers may not be assigned properly.