Onkyo CDR-201A - Manual (Page 8)

8
Using the remote controller
■ Using the RC-466S remote
controller that is supplied with the
Onkyo Separate Collection R-801A
components to operate the CDR-
201A.
• For more details, refer to the R-801A operation
manual.
Using the remote controller
When operating the remote controller, point it toward the
remote control sensor of the tuner amplifier.
CDR-201A
R-801A
Remote control
sensor
Notes:
• If the remote control sensor is subjected to
direct sunlight or inverted fluorescent light,
operation of the remote controller may be
adversely affected.
• Use of another remote controller nearby or
using the remote controller near equipment that
uses infrared light may cause operational
interference.
• Do not put objects on the remote controller. A
button on the remote controller may remain
pressed and drain the batteries.
• Make sure the CDR-201A is not placed behind
colored glass doors. Placing the CDR-201A
behind such doors may prevent proper
operation of the remote controller.
• If there is an obstacle between the remote
controller and the remote control sensor, the
remote controller will not operate.
30 °
5m
30 °