Tunturi E85S - Manual (Page 3)

GB
O W N E R ’ S M A N U A L
•
E 8 5 S E 8 5
3
or negligence of adjustment or
maintenance instructions described in
this manual.
•
The equipment must not be used by
persons weighing over 135 kg.
•
Make sure the equipment is unplugged
before carrying out any assembly or
maintenance procedures.
•
Do not attempt any servicing or
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
•
This product must be grounded. If
it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.
DANGER: Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or serviceman
if you are in doubt as to whether the
product is properly grounded. Do not
modify the plug provided with the
product - if it will not fit the outlet, have
a proper outlet installed by a qualified
electrician.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD OF
TUNTURI EXERCISING!
Your choice shows that you really want to invest in your
well being and condition; it also shows you really value
high quality and style. With Tunturi Fitness Equipment,
you’ve chosen a high quality, safe and motivating
product as your training partner. Whatever your goal in
training, we are certain this is the training equipment to
get you there. You’ll find information about using your
exercise equipment and what makes for efficient training
at Tunturi’s website at www.tunturi.com.
ASSEMBLY
Start by unpacking the equipment and check that you
have the following parts:
1. Frame
2. Rear and front support (E85)
3. Handlebar (E85)
4. Pedals (2 pcs) (E85)
5. Interface
6. Transformer
7. Assembly kit (contents marked with in the spare part
list): keep the assembly tools, as you may need them e.g.
for adjusting the equipment.
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no. of the
missing part. You’ll find a spare part list at the back of
this guide. The packaging includes a silicate bag for
absorbing moisture during storage and transportation.
Please dispose of the bag once you have unpacked the
equipment. The directions left, right, front and back are
defined as seen from the exercising position.
E85S
INTERFACE (SEE E85 PICTURES)
1. Connect the cable from the handlebar support tube
to the interface connector.
2. Handgrip pulse version: connect the cable from the
handlebar tube to the interface cable.
3. Push the interface carefully into place at the top of the
handlebar support tube.
4. Make sure that the moduleis correctly in place and
tighten the fastening screws.
E85
REAR SUPPORT
1. Place the support under the rear part of the frame.
Fasten it with two hex screws and washers.
2. Place the decorative plugs over the two hex screws.
HANDLEBAR SUPPORT TUBE
NOTE! The fastening screws are ready-mounted, so
please do not loosen them.
1. Expose the wire coming from the frame tube by
unwrapping the orange tape that covers it, and then
connect it to the wire from the handlebar support tube.
E85S__E85manual.indd 3 5.10.2004, 14:40:50