TOA Electronics CP-66 - Manual (Page 10)

4) Hands-free Substation
Speaker
In-use lamp
Speaker volume
switch
Privacy switch
Dial keys
Microphone
HF-210M+YC-200 HF-210M+YC-240S
PV Type
< Making a call >
1. Touching the key makes a call to the designated
station regardless of whether the Privacy switch on
the calling station is in the ON position or OFF posi-
tion.
2. Start conversation after the calling tone stops.
3. When the line is busy, a busy tone is heard and you
can camp on the line by simply waiting. As soon as
the line becomes free, your call is automatically
connected.
4. While a continuous calling tone or Privacy tone is
being sounded, you can make a voice call by continu-
ously depressing the key.
5. When the party you call is in a high noise level area,
your continuously depressing the key allows
one-way conversation to that party. As long as you
depress the key, your voice has dominance
and releasing the key will reverse the one-way
conversation from that party to you.
6. To terminate the conversation, depress the key.
< Responding to a call >
[Privacy switch is in the OFF.]
7. Respond to the call after the calling tone stops.
[Privacy switch is in the ON.]
8. A brief Privacy tone sounds from your station each
time there is an incoming call, and all incoming calls
are refused.
To respond, touch dial the
or key while the
line is connected between you and the calling party.
Note.
1. The sound volume of the speaker may be adjusted by
means of the 2-stage volume selector (VOL) switch.
2. The No.200 programming (Master/Sub relationship)
must be performed in the exchange to call a specified
master station.
— 6 —