TOA Electronics CP-66 - Manual (Page 43)

Call Forwarding
When you will be away from your station and wish all
incoming calls to be rerouted to a different destination you
are going to move to, you can do so by registering that
station number before you leave.
Registering Call Forwarding function
Registration of Call Forwarding
To program this function, touch dial plus the
station number of the destination you are going to move
to (confirmation tone is heard). This function may only
be registered at the originally assigned station and any
previous programming made for this function is auto-
matically cancelled each time the new destination is
registered.
Cancelling Call Forwarding function
Touch dial
Original assigned station No.
Notes.
1. Call made in the following instances are directly put
through to the original station, independently whether
or not this even if call forwarding function has been
programmed.
1. Calls from the registered destination station to the
original station.
2. Calls by a personal number.
2. Before a call is automatically rerouted to the regis-
tered station, a brief confirmation tone sounds at the
original station, indicating that the incoming call is
put through to the registered station.
3. This function is available only between stations
within the same group when the system employs
Group Blocking function. Even when it is possible to
make a call between stations of different groups,
Call Forwarding function cannot be registered be-
tween them.
Station
No.201
No.203
Cancellation of Call Forwarding
Station
No.201
Original Station No.
Station
No.201
No.203
Call
Station
No.202
Destination Station No.
— 38 —