TOA Electronics CP-66 User Manual

Page 13

Advertising
background image

7) Hands-free/Handset Master Station with Auto-Dialer

Model HF-250M

Handset

In-use lamp

Station number card

key

key

key

Liquid crystal

display (LCD)

REGISTER switch Rear side

Loud speaker

Auto-Dialer keys

Speaker volume switch

< Making a call >

1. Place the auto-dialer registration (REGISTER) switch in

the OFF position.

2. 16 registrations are possible with 8 keys by changing

over the A/B page selection key.
You can call any one of pre-registered stations by

touch-dialing the auto-dialer key.

3. For making a call and responding to a call without using

the auto-dialer, refer to "5) Hands-free/Handset Master

Station HF-200M/200MB/250M (With Auto-Dialer)".

< Auto-dialer registration >

Two station numbers can be registered by each auto-dialer

key.
Operation

1. Switch the (REGISTER) switch ON.

or

2. Press

the

key

until

is

appeared on the LCD display.

Press it three times for

and

twice for

3. Press the auto-dialer key (

)to

select the station number to be registered.

Indication on the liquid crystal display.

4. Press the A/B page selector key to select either A or B

page.

5. Station numbers can be consecutively registered by

maximum 50 digits using the dial keys.

Indication on the liquid crystal display.

6. Press the

key, and the dialled numbers are

memorized.

7. Repeat steps (3) through (6) to register other station

numbers.

8. Switch the (REGISTER) switch OFF after completing

registration.

key

< Liquid crystal display >

A. Indication on the liquid crystal display in conjunction with

the DT-E70 is changed with three status.

1. When waiting

Privacy mode status, page selection

and time indication

Displays "PV"status when

the privacy key is set to ON.

Displays either A or B page

of the autodialer.

2. When dialling for paging

Dial monitor indication

3. When responding to a call

Note. For detailed indication mode, refer to "Calling Party
Indication (Numerical Type)"

B. Indication on the liquid crystal display is changed into two

status when the HF-250M is used solely.

His-own-station number

1. When waiting

Privacy

mode

status,

page

selection

and

his-own-station number

2. When dialling for paging

Dial monitor indication

Note. For registration to use the liquid crystal display, refer

to "Operating Instructions of the HF-250M and DT-E70".

Calling station number

Waiting station number

Number of waiting stations

key

— 9 —

Indication on the liquid crystal display

Advertising