TOA Electronics CP-66 - Manual (Page 58)

Programmable Restricted Access for Stations
Stations at which the following 7 specified functions can
be restricted.
1. All-call paging
2. Zone paging.
3. Conference
Station number
4. General purpose control
Mode 1 (One-shot make output)
5. General purpose control
Mode 2 (Make/break output)
6. General purpose control
Mode 3 (8 selectable one-shot make output)
Unit No. Condition No.
General purpose control
Mode 4 (8 selectable output or decimal output)
Unit No. Condition No.
7. General purpose control
Mode 5 (4 decimal digits output)
(Unit No.) (4-digits)
1. For conference, only the specified stations (one or
more) can make a call, but any station can be called.
2. No.200 programming must be established for the speci-
fied stations.
—53—