TOA Electronics CP-66 User Manual

Page 4

Advertising
background image

Introduction to the "Functions and Operating Instructions" for stations for EXES-6000

This handbook explains the functions and operating
procedures of stations for TOA's EXES-6000 Intercom
System.

"PV" Type and "NP" Type

Please note that performances of some functions are
restricted in the tie-line system.
You need not read all the instructions given in this hand-
book but it is necessary to read the instructions on those

functions employed in your system. The following guide-

lines will help you select the pages that you should read.

Selecting different functions made available by placing the

Privacy Switch in the "ON" position
The EXES-6000 System is designed to allow either "PV"
type operation (the system having Privacy function) or
"NP" type (without Privacy function) to be selected by

turning on or off a switch inside the exchange. It is impos-

isble to make one station the "NP" type and another the

"PV" type in the same system.

This handbook is comprised of the following 4 chapters:

Chapter 1. Basic functions, their operating procedures

and all functions.

Chapter 2. Functions and operating procedures of single

exchange system.

Chapter 3. Functions and operating procedures of tie-

line system.

Chapter 4. Functions and Operating procedures of

External Interface system.

Refer to Chapters 1, 2 and 4 for single exchange system

and to Chapters 1, 3 and 4 for tie-line system.

The function provided when the Privacy switch is in the ON
position is different between the "PV" and the "NP" type.
Therefore, read the page marked

if your system

is of the "PV" type and the Page

if it is of the

"NP" type.

Note.

*1. Before you use a PV-type handset station, it is necessary

that you first register that station by station No.200

programming.

*2. By programming, the continuous calling tone function

may be made available to specific stations with the
Privacy switch in the OFF position.

other than the

key stops the calling tone

and permits conversation.
This feature may be employed in the industrial type of
station (Model HF 670M) or in the "PV" type system
that needs to be continuously called.

— 1 —

Type

PV Type

NP Type

Definition

System having
Privacy function

System having

no Privacy func-
tion

Description

1. Privacy tone

With the Privacy switch in
the ON position, a brief

Privacy tone sounds and *1

1. Continuous calling tone

A station with the Privacy
switch may be called by the
continuous calling tone

when its Privacy switch is

placed in the ON position.

One touch dialing any key

through

key or picking up the
handset stops the calling
tone and the stations is
made ready to initiate the
response to the call.

*2

2. The Handset Master

station without Privacy
switch may be called by
the continuous calling
tone. Picking up the hand-
set stops the calling tone
and allows the conversation.

other than the

any incoming call is refused.

In this event, touch dialing any key (

through

Advertising