Selectable calling tone, Selectable paging pre-paging tone duration, Time-out of paging call – TOA Electronics CP-66 User Manual

Page 97: Time-out of conversation

Advertising
background image

Selectable Calling Tone

The duration of the calling tone can be set for either 0.2

second (single note tone) or 0.3 second (warble tone).

It is also possible to have the station without any calling

tone.

Note.

1. The duration of the continuous calling tone is im-

possible to change.

2. It is impossible to use different calling tone modes in

one same system.

Selectable Paging Pre-paging Tone Duration

Paging pre-paging tone can be chosen from "2 seconds",
"1 second" and nothing.

Time-Out of Conversation

It is possible to limit the conversation duration to one

through ninty-nine minutes in the unit of one minute in
order to improve speech path availability. A hurry-up
tone is sounded in both the calling and called stations
approximately 10 seconds before the busy stations are
automatically disconnected from the speech path.

Time-Out of Paging Call

This function is employed to prevent the unnecessary
line occupation as a result of a paging party's failure to
depress the

key after a paging call establishment. The

paging call is automatically cancelled after a certain
period of time, which may be set at one through ninty-

nine minutes in the unit of one minute, with a hurry-up

tone transmitted to the paging station approximately 10
seconds prior to the automatic disconnection. When the
paged party responds, the conversation is automatically
cut off after the duration set by the Time-out of con-

versation function.

Tie-line

—91—

Advertising