Tektronix 070-9180-01 User Manual
Page 38
Syntax and Commands
Option 01 VXI Interface Module User Manual
3–13
Table 3–2: Summary of IEEE-488.2 Common Commands (Cont.)
Command/Syntax
Description
Reset*
*RST
The Option 01 VXI interface is placed in its power-up
state with some exceptions.
Service Request Enable
*SRE <NRf>
Sets the contents of the Service Request Enable
register.
Service Request Enable Query
*SRE?
Returns the current value of the Service Request
Enable register in <nr1> format.
Read Status Byte Query
*STB?
Returns the current value of the Status Byte register in
<nr1> format.
Trigger
*TRG
Equivalent to a VXI Trigger command.
Self-Test Query
*TST?
Performs a self test of the Option 01 VXI Interface
daughter board and any relay modules under its
control. Place a “0” or “1” into the output queue to
indicate whether the self test passed or failed.
Wait-to-Continue
*WAI
Does not execute any further commands or queries
until all pending operations have been completed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com