Tektronix 070-9180-01 - Manual (Page 70)

Command Descriptions
3–46 Option 01 VXI Interface Module User Manual
Command Response
trigger:sequence:
source immediate
Define a trigger source of “immediate”. This means to
sequence through the scan list without waiting for a trigger
event.
trigger:sequence:count
5
Sequence through the entire scan list five times.
route:close:dwell
gp,.5
Wait 0.5 seconds after closing a relay on the VX4350.
initiate:immediate
Begin sequencing through the scan list.
*OPC
Set the Operation Complete bit of the Standard Event Status
register after sequencing through the scan list five times.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com