Tektronix 070-9180-01 - Manual (Page 57)

Command Descriptions
Option 01 VXI Interface Module User Manual 3–33
MODule
[ROUTe:]MODule
[:DEFine] <module_name>,<nrf>
[ROUTe:]MODule
[:DEFine]? <module_name>
See examples.
Default module names are assigned as follows:
The module that has a Option 01 VXI Interface daughter board installed is
assigned module name “M1”.
Modules without the Option 01 VXI Interface daughter board in consecutive
slots to the right of module “M1” are assigned module names “M2”, “M3”, ...,
“M11”.
A module name may consist of up to 12 characters. The name must start with a
letter and may consist of alphanumeric characters, underscores, and digits.
[ROUTe]:MODule:DELete[:NAME]
[ROUTe]:MODule:DELete:ALL
[ROUTe:]MODule:CATalog?
This command assigns a module name to a relay switching module. This name is
used to identify the module in channel lists in [ROUTe:]OPEN,
[ROUTe:]CLOSe, and [ROUTe:]SCAN commands.
In these examples the Option 01 is installed on a VX4350 Module. A VX4380
and VX4330 are installed in consecutive slots to the right of the slot containing
the VX4350.
Command Response
route:module:define
gp_switch,1
Assign module name “gp_switch” to the VX4350.
route:close
(@gp_switch(1:64))
Close all 64 relays on the VX4350.
Command Syntax
Query Syntax
Query Response
*RST Value
Limits
Related Commands
Description
Examples
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com