Tektronix 070-9180-01 - Manual (Page 75)

Command Descriptions
Option 01 VXI Interface Module User Manual 3–51
SYSTem
SYSTem
:ERRor?
Each response is terminted with a carriage return <CR> and a line feed<LF>.
0,“No error”
–102, “Syntax error; 1 dimensional <channel_spec> invalid for VX4330
module”
–102, “Syntax error; 2 dimensional <channel_spec> invalid for VX4350
module”
–102, “Syntax error; 3 dimensional <channel_spec> invalid for VX43xx
module”
–102, “Syntax error; channel dimension mismatch”
–102, “Syntax error; integer field greater than 10 characters”
–102, “Syntax error; Missing module name”
–102, “Syntax error; Module address not specified”
–102, “Syntax error; Module name already defined”
–102, “Syntax error; Module name length greater than 12 characters”
–102, “Syntax error; Non-contiguous section numbers”
–102, “Syntax error; ROUTe:CONFigure command invalid for VX43xx module”
–102, “Syntax error; ROUTe:DISJoin command invalid for VX43xx module”
–102, “Syntax error; ROUTe:JOIN command invalid for VX43xx module”
–102, “Syntax error; ROUTe:MODE command invalid for VX43xx module”
–102, “Syntax error; Undefined module name”
–102, “Syntax error; Unexpected x detected while ...”
–121, “Invalid character in number”
–123, “Exponent too large”
–200, “Execution error; Reserved”
–200, “Execution error; Scan list undefined”
Command Syntax
Query Response
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com