Tektronix 070-9180-01 - Manual (Page 44)

Command Descriptions
3–20 Option 01 VXI Interface Module User Manual
VX4330, VX4350, and VX4380 for more information on the format of relay
numbers for these modules.
[ROUTe:]OPEN <channel_list>
[ROUTe:]MODule:DEFine
OUTPut:TTLTrg<n>[:STATe]
This command closes the relays specified in the <channel_list> portion of this
command.
In these examples the Option 01 is installed on a VX4350 Module. A VX4380
and VX4320 are installed in consecutive slots to the right of the slot containing
the VX4350. The default module names for the VX4350, VX4380 and VX4320
in this configuration are m1, m2, and m3 respectively. These module names may
be altered with the [ROUTe:]MODule:DEFine command.
Command Response
route:close (@m3(4!8)) Close relay 4 in section 8 of the VX4320 RF Mux Module.
route:close
(@m1(1,2,3,10:64))
Close relays 1,2,3 and 10 through 64 on the VX4350 General
Purpose Switch Module.
route:close
(@m2(3!16!4))
Close row 3, column 16 of section 4 of the VX4380 Matrix
Module.
route:close
(@m3(2!1:2!8))
Close relay 2 in sections 1 through 8 on the VX4320 RF Mux
Module.
route:close
(@m3(4!8),m2(3!16!4))
Combined effect of examples 1 and 3.
route:module:define
rfmux,3
route:close
(@rfmux(3!2))
Close channel 3 of section 2 on the VX4320 Module after
redefining its module name to “rfmux”.
route:close
(@m2(1!1!1,4!6!2))
Close the following relays on the VX4380 Matrix Module:
Row
Column Section
1 1 1
4 6 2
route:close?
(@m1(1,2,3,4))
1 1 0 0
This response indicates that relays 1 and 2 on the VX4350 are
closed and relays 3 and 4 on this module are open.
route:close?
(@rfmux(3!2))
1
This response indicates that channel 3 of section 2 of the
VX4320 is closed. Note that a route:module:define rfmux,3
command has been received prior to this query.
Related Commands
Description
Examples
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com