Tektronix 070-9180-01 - Manual (Page 47)

Command Descriptions
Option 01 VXI Interface Module User Manual 3–23
In these examples the Option 01 is installed on a VX4330 Module. Two addi-
tional VX4330 Modules are installed in consecutive slots to the right of this
module.
Command Response
route:mode mux
m1,(1:6)
Set all six sections of the first VX4330 to mux mode.
route:conf
twire,m1,(1:6)
Configure all six sections of the first VX4330 to 20-to-1 2-wire
scanner/mux.
route:close mode
scan m3 (1:3)
Close the first 10 relays in section one of the first VX4330.
scan,m3,(1:3)
Set sections 1 through 3 on the third VX4330 to scan mode.
Examples
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com