Tascam HS-4000 - Manual (Page 101)

TASCAM HS-4000
101
16 – Messages
Message Details and responses Remarks
Rebuild selected Session? Confirm that you want to rebuild the selected session.
Rebuilding All … All projects are being rebuilt.
Rebuilding project … The project is being rebuilt.
Rebuilding Session … The session is being rebuilt.
RECORD Error An error occurred during recording.
RECORD Error
Buffer overflow The recording buffer became full during recording,
and writing to the card could not keep up.
RECORD stopped.
Media Full. The CF card ran out of space, so recording stopped.
Redo Completed Redoing an edit has completed.
REMOTE/KEYBOARD Locked The remote and keyboard connectors have been
locked to prevent misoperation. (Shown when a
command is received from the remote or keyboard)
Renaming Project
“pppppp”
to “nnnnnn” The project is being renamed. pppppp = old project name
nnnnnn = new project name
Save changes in Current Playlist*
“llllllll” Confirm that you want to save changes to the current
playlist. Playlist* = Playlist, Playlist A or Playlist B
llllllll = playlist name
Save changes in Current Session
“ssssssss” Confirm that you want to save changes to the current
session. ssssssss = session name
Save Failed. Saving the file failed.
Saving File…
Do not remove CF The file is being saved. Do not remove the CF card.
Screen Locked
Touch screen Locked Out The touch screen has been locked to prevent
misoperation.
Screen Locked
LCD Section Locked LCD section controls have been locked to prevent
misoperation. (Shown when the LCD screen or
adjacent buttons are pressed)
Session Copy failed Copying the session failed.
Session Delete failed. Erasing the session failed.
Session Load failed. Loading the session failed.
ssssssss
TAKES: n
Fs: f
TOTAL SIZE: u
TOTAL TIME: t This shows session information. ssssssss = session name
n: number of takes
f: sampling frequency
u: space used
t: total time of all takes
Starting USB USB mode is being enabled.
Take Delete failed. Deletion of the take failed.
TAKE limit back to full.
Change to Sub Folder? If Mono File Place is set to SubFolder, the limit to the
number of takes is restored to the maximum.
TAKE limit reduced…
Change to Session Root? If Mono File Place is set to Session Root, the limit to the
number of possible takes is reduced.
Take Load failed. Loading of the take failed.
There is no Entry.
The playlist does not have any entries, so playback is
not possible. Select a playlist with entries or add
entries to the current one.
There is no project.
Please create a project. There is no project so the recording cannot be made.
Make a project.
There is no Sessions.
Please make a Session. There is no session so the recording cannot be made.
Make a session.