Tascam HS-4000 - Manual (Page 37)

TASCAM HS-4000
37
5 – Projects
Session operations
Creating new sessions
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the e button of the project to which you want
to add a session to open the session selection screen.
If it is not the current project, a pop-up window
appears confirming that you want to load it. Touch
the
OK button.
3. Touch the MAKE SESSION button to open the MAKE
SESSION screen.
You can make the following settings on this screen.
Session Name
Touch the Session Name button to open a screen
where you can change the name of the session.
The maximum number of characters for session names is
31. Extra characters are discarded. The maximum number
of characters allowed is indicated by a yellow
background.
TIMELINE START TIME
Press the EDIT button to open a screen where you can
change the starting time in timeline mode.
TIMELINE Rec Tracks
Set the number of recording tracks used in timeline
mode.
Options:
2tr , 3tr , 4tr
CAUTION
・ Session names cannot be changed later.
・ You cannot use the “@” symbol at the beginning of a session name.
4. Touch the MAKE SESSION button.
5. Touch the OK button or press the DATA dial when the
confirmation pop-up message appears.
During the creation of a session, a progress status pop-up
appears.
When session creation completes, the pop-up disappears.
NOTE
・ Immediately after creation, the new session becomes the current
(loaded) session.
・ The letter “C” appears in the icon to the left of the name of the
current session on the session selection screen.
Loading sessions
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the e button for the project that contains the
session that you want to load to open the session list.
If it is not the current project, a pop-up window
appears confirming that you want to load it. Touch
the
OK button.
3. Select the session that you want to load.
4. Touch the
MENU button on the SESSION screen to
open a pull-up menu.
5. Touch the LOAD button in the pull-up menu.
6. Touch the OK button or press the DATA dial when a
confirmation pop-up message appears.
After loading completes the Home Screen opens.
NOTE
The letter “C” appears in the icon to the left of the name of the current
session.