Tascam HS-4000 - Manual (Page 68)

68
TASCAM HS-4000
9 – Playlist mode
Creating a JPPA PPL file from the loaded
playlist
1. Press the HOME key on the front panel to open the
Home screen.
2. Touch the File or Title Name button on the Home
screen to open a pull-down menu.
3. Touch the EXPORT PPL button in the pull-down menu
to open the PPL EXPORT screen where you can edit
the name of the JPPA PPL file that will be created.
Input the file name. Follow the procedures in “Editing the
project name” on page 35.
NOTE
 If you have previously created the current playlist from a JPPA PPL file
(imported) or created a JPPA PPL file (exported) from the current playlist, a
pop-up window will appear to confirm that you want to overwrite that
JPPA PPL file.
Touch the OK button to overwrite that file or the RENAME button to open
the PPL EXPORT screen.
 You can also touch the MENU button on the ENTRY list or ASSIGN file
screen to open a pull-up menu, and touch the EXPORT PPL button to
create a JPPA PPL file.
Entry List Screen
Assign File Screen
4. Touch the Enter button on the PPL EXPORT screen or
press the DATA dial.
5. Touch the OK button or press the DATA dial when a
confirmation pop-up message appears.
The selected playlist is converted into JPPA PPL file. The file
is created inside the _playlists folder, which is in the session
folder that contains the selected playlist.
While the file is being created, a progress status pop-up
appears.
When file creation completes, the pop-up disappears.
NOTE
 When a JPPA PPL format file is created, playlist information for both player
A and player B is output into a single file.
 If a file with the same name already exists, a pop-up window opens to
confirm whether you want to overwrite that file or not. Touch the OK
button to overwrite that file, or touch the CANCEL button to return to the
AES31 NAME screen.