Tascam HS-4000 - Manual (Page 87)

TASCAM HS-4000
87
11 – Mark and locate functions
Manual locate function
You can directly input a time and locate to it.
Touch the Manual Locate button on the Home Screen to open
the
MANUAL LOCATE screen.
Touch the FRAME EDIT button to set whether or not the frame
value can be edited.
FRAME EDIT on
FRAME EDIT off
There are three locate modes as follows.
ABS : Input an actual time and locate to it.
+ : Input an amount of time to go forward from the current
time.
– : Input an amount of time to go backward from the current
time.
Input the time using the number buttons.
You can also select a number field in the
LOCATE area and use
the DATA dial to adjust the time.
Press the
LOCATE button to locate to that new time and return
to the Home Screen.
Touch the
CLEAR button to clear all input values.
TIP
・ This can also be input using an externally connected keyboard.
・ Press the keyboard’s Enter key to confirm a setting and its ESC key to
clear all the values.